涩里番

Skip to Content
Need Help
Statement of Attainment training in 3D Models of Building Designs
Show sidebar
  1. Home
  2. Courses
  3. Professional
  4. Building Design
  5. 3D Models of Building Designs

Overview

This course is for those looking to extend their building design project experience in the use of producing three-dimensional (3D) models using Autodesk Revit 庐. Specifically for small-scale building designs covered by the Building Code of Australia (BCA), except construction Type A buildings.

It incorporates building information modelling (BIM) and rendered animation walk-throughs of both residential and commercial projects.

Qualification:

 Statement of Attainment - training in 3D Models of Building Designs

Next Intake:

 Semester 1 2025

Course No:

 SA-TS77

Campus:

 涩里番Bruce 

Duration:

 The Statement of Attainment consists of three units of competency. To obtain the Statement of Attainment all three units must be completed.
CPPBDN5101 - Produce digital 3-D models of building designs 17 weeks 3 hours per week
CPPBDN5111 - Produce rendered animations of 3-D models of small-scale building designs 9 weeks 3 hours per week
CPPBDN6106 - Produce building information modelling for building design projects 17 weeks 3 hours per week

Cost Info:

Enrolment fees for this course are based on the costs per subject as indicated below. The total course cost may vary depending on the choice of elective subjects or if subjects are attempted more than once. Subject costs identified as Standard are partially subsidised by the ACT Government. Concessions may be available to eligible students.

Indicative Cost:

 Standard fee $720

Likely Job Outcome:

 Employment in construction design. Enhanced skills for building designers, architects and Building Information Modelling managers.

Skills and knowledge in this training meet the needs of industry personnel responsible for 3D modelling, drafting, documentation and 3D visualisation for residential, commercial, and industrial building design projects.

Application Type:

 Standard
Share:

Timetable Information

To help with the enrolment process print your timetable, or keep the window open, so that you can refer back to it for your course code, course name, and the Course Reference Numbers (CRNs) or Block Code.

Additional Information

Students will need access to their own Windows computer with sufficient memory to meet the requirements of the Unit of Competency being studied.

Entry Requirements

There are no entry requirements for CPPBDN5101 - Produce digital 3-D models of building designs however CPPBDN5101 must be successfully completed to enroll in either CPPBDN5111 - Produce digital 3-D models of building designs and/or CPPBDN6106 - Produce digital 3-D models of building designs.
(You will need to collect and retain confirmed evidence of any entry requirements if stated)

Skills Recognition

To study any course at 涩里番(excluding non-accredited training) you must have a Unique Student Identifier (USI).

Transition Information

Qualifications at 涩里番are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. 涩里番will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, 涩里番may need to cancel or change classes at short notice. 涩里番will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via 涩里番Self Service or by contacting 涩里番Student Services at infoline@cit.edu.au.


Subject Information

Complete 3 subjects

Core: Complete all 3

  • CPPBDN5101   Produce digital 3-D models of building designs
    • 涩里番Code: BLDG285
      Cost: Standard $235.00
      Description: This unit specifies the skills and knowledge required to produce three-dimensional (3-D) models for small-scale building design projects involving residential projects and commercial or industrial projects up to 2,000m2 floor area and buildings of Type B and C construction, as defined in the National Construction Code (NCC).This unit is suitable for drafters and building designers who apply technical and theoretical knowledge and skills to building design work tasks.This unit forms part of the licensing requirements for people engaged in building design in some states and territories. For further information, check with the relevant regulatory authority.
      Prerequisites: Nil
  • CPPBDN5111   Produce rendered animations of 3-D models of small-scale building designs
    • 涩里番Code: BLDG294
      Cost: Standard $213.00
      Description: This unit specifies the skills and knowledge required to produce rendered and animated fly-bys and walk-throughs of three-dimensional (3-D) models for small-scale residential, commercial and industrial building design projects to a maximum floor area of 2000m2, except construction Type A buildings.Building classifications and construction types are set out in the National Construction Code (NCC).This unit is suitable for drafters and building designers who apply integrated technical, theoretical and creative skills to develop digital models that support design projects.This unit forms part of the licensing requirements for people engaged in building design in some states and territories. For further information, check with the relevant regulatory authority.
      Prerequisites: Nil
  • CPPBDN6106   Produce building information modelling for building design projects
    • 涩里番Code: BLDG295
      Cost: Standard $272.00
      Description: This unit specifies the skills and knowledge required to develop building information modelling (BIM) for residential, commercial or industrial building design projects. It includes BIM authoring, collaborating with consultants and contractors from other disciplines and creating project documentation using modelling software programs.This unit is suitable for experienced building designers who draw on broad theoretical and technical knowledge and high-level technology skills to develop BIM models to support building design. This unit forms part of the licensing requirements for people engaged in building design in some states and territories. For further information, check with the relevant regulatory authority.
      Prerequisites: Nil

Related Courses

Certificate IV Residential Drafting CPP40121

More Information

For more information about this course please contact 涩里番Student Services on (02) 6207 3188 or email infoline@cit.edu.au