涩里番

Skip to Content
Need Help
Statement of Attainment Operating a Mobile Crane for a Licence [CN to CO]
Show sidebar
  1. Home
  2. Courses
  3. Trades
  4. Crane Licences
  5. Operating a Mobile Crane for a Licence [CN to CO]

Overview

This course will provide you with the skills and knowledge required to safely operate various types of mobile crane. You can gain skills in operating non-slewing mobile crane (greater than 3 tonnes capacity), a slewing mobile crane (up to 20 tonnes, 60 tonnes, 100 tonnes and over 100 tonnes).

Licensing Information
Competence in this unit does not in itself result in a licence. A licence is obtained after competence is assessed under applicable Commonwealth, state or territory work health and safety (WHS) regulations.

The National Assessment Instrument (NAI) is the mandated assessment for the relevant licence as detailed in this unit.

Successful participants are required to lodge an application for a High Risk Work Licence with the regulatory body in the State/Territory they complete training in within 60 days from the issue date of the Statement of Attainment.

Regulatory Information
All workers on a construction site require a General Construction Induction Card (White Card).

Construction workers are required to complete the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work prior to starting work.

Qualification:

 Statement of Attainment - Operating a Mobile Crane for a Licence [CN to CO]

Next Intake:

 Ongoing

Course No:

 SA-TS79

Campus:

 涩里番Bruce 

Duration:

 Four weeks: 2 x 4-hour evenings per week. As well as 1 x full day over a weekend. (40 hours)

Prior to assessment, you must also complete additional time in the workplace, undertaking various tasks related to operating a mobile crane. This time will vary depending on experience of the individual learner.

Cost Info:

Further information about fees is available at Course fees and assistance

Indicative Cost:

 Slewing mobile crane (over 100 Tonnes) $1,950

Slewing mobile crane (up to 20 tonnes) $1,950

Slewing mobile crane (up to 60 tonnes) $1,950

Slewing mobile crane (up to 100 Tonnes) $1,950

TFA fees may apply dependant on eligibility, please check with the High Risk Department for more information.

Likely Job Outcome:

 Licensed mobile crane operator

Application Type:

 Register Your Interest
Share:

Additional Information

PPE
During training and assessment, participants must wear suitable PPE for working on a construction site, including at a minimum:
- high visibility clothing,
- safety boots,
- eye protection,
- hearing protection, and
- hard hat

涩里番Logbook
You will be issued with a 涩里番logbook for the purpose of recording training time received on a work site and formal skills training at CIT. You will be required to submit your completed logbook before undertaking the Safe Work accredited national assessment.

Entry Requirements

Participants must:
- Be physically fit and able to work at heights.
- Be a minimum of 18 years of age.
- Have access to a workplace with the required equipment, our trainers can advise if your workplace is appropriate.
- Have English language skills to effectively communicate and work safely with others in the work area and to read and comprehend manufacturer's instructions and workplace procedures and safety signs. Participants must also be able to apply mathematical procedures for the estimation and measurement of loads. These skills will be checked prior to enrolment.

You will need to collect and retain confirmed evidence of any entry requirements if stated.

Skills Recognition

To study any course at 涩里番(excluding non-accredited training) you must have a Unique Student Identifier (USI).

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level course. Please visit Foundation Skills.

Transition Information

Qualifications at 涩里番are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. 涩里番will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, 涩里番may need to cancel or change classes at short notice. 涩里番will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via 涩里番Self Service or by contacting 涩里番Student Services at infoline@cit.edu.au.


Subject Information

Complete 1 subjects

Complete 1

  • TLILIC0020   Licence to operate a slewing mobile crane (over 100 Tonnes)
    • 涩里番Code: CNST1002
      Cost: Full fee $1,950.00
      Description: This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) over 100 tonnes in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a High-Risk Work Licence (HRWL) to operate this plant. Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include: a front-end loader, or a backhoe, or an excavator, or other earth moving equipment, when configured for crane operation. A person performing this work is required to hold a slewing mobile crane with an MRC over 100 tonnes HRWL. This unit requires a person operating a slewing mobile crane with an MRC over 100 tonnes to: plan for the work/task prepare for the work/task perform work/task pack up. Licensing/Regulatory Information Legislative and regulatory requirements are applicable to this unit of competency. This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) regulations and meets Commonwealth, state and territory HRWL requirements. The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licensing class as detailed in this unit.
      Prerequisites: Nil
  • TLILIC0022   Licence to operate a slewing mobile crane (up to 20 tonnes)
    • 涩里番Code: CNST1003
      Cost: Full fee $1,950.00
      Description: This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) up to 20 tonnes in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a High-Risk Work Licence (HRWL) to operate this plant. Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include: a front-end loader, or a backhoe, or an excavator, or other earth moving equipment, when configured for crane operation. A person performing this work is required to hold a slewing mobile crane with a MRC up to 20 tonnes HRWL. This unit requires a person operating a slewing mobile crane with an MRC up to 20 tonnes to: plan for the work/task prepare for the work/task perform work/task pack up. Licensing/Regulatory Information Legislative and regulatory requirements are applicable to this unit of competency. This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) regulations and meets Commonwealth, state and territory HRWL requirements. The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licensing class as detailed in this unit.
      Prerequisites: Nil
  • TLILIC0023   Licence to operate a slewing mobile crane (up to 60 tonnes)
    • 涩里番Code: CNST1004
      Cost: Full fee $1,950.00
      Description: This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) up to 60 tonnes in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a High-Risk Work Licence (HRWL) to operate this plant. Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include: A front-end loader, or a backhoe, or an excavator, or other earth moving equipment, when configured for crane operation. A person performing this work is required to hold a slewing mobile crane with an MRC up to 60 tonnes HRWL. This unit requires a person operating a slewing mobile crane with an MRC up to 60 tonnes to: plan for the work/task prepare for the work/task perform work/task pack up Licensing/Regulatory Information Legislative and regulatory requirements are applicable to this unit of competency. This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) regulations and meets Commonwealth, state and territory HRWL requirements. The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licensing class as detailed in this unit.
      Prerequisites: Nil
  • TLILIC0021   Licence to operate a slewing mobile crane (up to 100 Tonnes)
    • 涩里番Code: CNST1005
      Cost: Full fee $1,950.00
      Description: This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) up to 100 tonnes, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a High-Risk Work Licence (HRWL) to operate this plant. Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include: a front-end loader, or a backhoe, or an excavator, or other earth moving equipment, when configured for crane operation. A person performing this work is required to hold a slewing mobile crane with an MRC up to 100 tonnes HRWL. This unit requires a person operating a slewing mobile crane with an MRC up to 100 tonnes to: plan for the work/task prepare for the work/task perform work/task pack up. Licensing/Regulatory Information Legislative and regulatory requirements are applicable to this unit of competency. This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) regulations and meets Commonwealth, state and territory HRWL requirements. The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licensing class as detailed in this unit.
      Prerequisites: Nil

No results were found


More Information

For more information about this course please contact 涩里番Student Services on (02) 6207 3188 or email infoline@cit.edu.au