涩里番

Skip to Content
Need Help
Certificate III in Heavy Commercial Vehicle Mechanical Technology AUR31120
Show sidebar
  1. Home
  2. Courses
  3. Trades
  4. Automotive
  5. Heavy Commercial Vehicle Mechanical Technology

Overview

This qualification will provide you with the skills and knowledge to be competent in a range of Heavy Commercial Vehicle Mechanical roles.

You will gain and apply a broad set of skills and knowledge on a variety of heavy commercial vehicles in the automotive mechanical service and repair sector.

To achieve the Certificate III in Heavy Commercial Vehicle Mechanical Technology you need to complete the 22 CORE units and 14 ELECTIVE units.

Qualification:

 Certificate III in Heavy Commercial Vehicle Mechanical Technology AUR31120

Next Intake:

 Semester 1 2025

Course No:

 C3-TS32

Campus:

 涩里番Fyshwick 

Duration:

 - Apprentice: 6 semesters part-time (9 blocks per year, approximately 24 hours per week per block)
- ASbA in year 10: 6 semesters,1 day per week, approximately 8 hours per day
- ASbA in year 11: 4 semesters,1 day per week, approximately 8 hours per day.

Cost Info:

Fee information for completing this course under an Australian Apprenticeship arrangement is available on the Apprenticeships and Traineeships page. The total course cost may vary if subjects are attempted more than once.

Indicative Cost:

 Apprentice/trainee
  • Subsidised fee $2,205
  • Full fee $17,900

Likely Job Outcome:

 Truck mechanic or Heavy machinery mechanic.

Application Type:

 Apprentice/Trainee
Share:

Additional Information

You will need to wear appropriate protective clothing and equipment when in the automotive workshops.
These include:

  • Overalls
  • Long pants - cotton drill/ jeans
  • Leather safety boots
  • Safety glasses
  • Welding helmet
  • Welding gloves
Electives will be chosen in consultation with local Heavy Commercial Vehicle industry representatives.

This qualification may also be achieved through other pathways which do not involve a contract of training, such as recognition of prior learning. In all cases achievement or recognition of competence is necessary in all of the required units of competency to be awarded a national qualification, please consult 涩里番staff for advice.

From Semester 1 2023 you will be required to bring your own laptop or tablet to each class.

Entry Requirements

Early in the course your skills will be assessed 鈥� if you cannot read and write documents and complete maths work to the level needed you will be enrolled into additional subjects to help you build the skills needed to successfully complete the course.

If you are entering this program as an apprentice/trainee you must:
- be employed in the auto industry
- be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
- If you already have skills in this area, you may seek recognition for all or part of this course.

Skills Recognition

To study any course at 涩里番(excluding non-accredited training) you must have a Unique Student Identifier (USI).

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework levels of at least 2 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with a lower level course, or enrol in the Certificate II in Skills for Work and Vocational Pathways (FSK20119) to develop your literacy skills. Please visit 涩里番Foundation Skills page.

Transition Information

Qualifications at 涩里番are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. 涩里番will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, 涩里番may need to cancel or change classes at short notice. 涩里番will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via 涩里番Self Service or by contacting 涩里番Student Services at infoline@cit.edu.au.


Subject Information

Complete 36 subjects

Complete all 14

  • AURASA102   Follow safe working practices in an automotive workplace
    • 涩里番Code: AUTM675
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to identify and follow safety and emergency procedures in an automotive workplace. It involves safety procedures to be followed when using workplace hand tools and hand-held power tools, fixed equipment, and chemicals, and when running vehicles and machinery. It includes the individual's responsibility for safety and emergency response in the event of an accident or incident.The unit applies to those who work on agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, motorcycles, mobile plant machinery or outdoor power equipment in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTA104   Carry out servicing operations
    • 涩里番Code: AUTM743
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to carry out servicing operations. It involves preparing for the task, identifying lubricant requirements, servicing and adjusting vehicle and machinery, reporting the inspection findings, and completing workplace processes and documentation.The unit applies to those working in the automotive service and repair industry. The servicing operations include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery, motorcycles or outdoor power equipment. The servicing undertaken will vary based upon on occupation of the learner.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTA006   Inspect and service hydraulic systems
    • 涩里番Code: AUTM171
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the performance outcomes required to inspect and service hydraulic systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The hydraulic systems include those of agricultural machinery, heavy commercial vehicles, marine vessels, mobile plant machinery or outdoor power equipment. This unit is not intended for drive systems, power steering or hydraulic braking systems.
      Prerequisites: Nil
  • AURETR112   Test and repair basic electrical circuits
    • 涩里番Code: AUTM680
      Cost: Standard $85.00
      Apprentice $85.00
      Description: This unit describes the skills and knowledge required to inspect, test and repair basic electrical circuits in vehicle and machinery electrical systems. It involves preparing for the task, inspecting and testing the circuit, repairing the circuit, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The basic electrical circuits include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURETR125   Test, charge and replace batteries and jump-start vehicles
    • 涩里番Code: AUTM686
      Cost: Standard $35.00
      Apprentice $35.00
      Description: This unit describes the skills and knowledge required to test, charge, replace, retest and secure a range of automotive batteries, including vehicle or machinery jump-starting procedures. It involves preparing for the task, inspecting and testing the battery to determine serviceability, charging, jump-starting, removing and replacing, and undertaking the final retesting of batteries, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The batteries include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTF102   Inspect and service diesel fuel injection systems
    • 涩里番Code: AUTM749
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to inspect and service diesel fuel injection systems. It involves preparing for the task, inspecting the fuel injection system for leaks, inspecting the air filter, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation.The unit applies to those working in the automotive service and repair industry. The diesel fuel injection systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, motorcycles, mobile plant or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTK102   Use and maintain tools and equipment in an automotive workplace
    • 涩里番Code: AUTM751
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to select, use, maintain and store tools and equipment in an automotive workplace.The unit applies to those who work in all sectors of the automotive industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTA105   Select and use bearings, seals, gaskets, sealants and adhesives
    • 涩里番Code: AUTM799
      Cost: Standard $25.00
      Apprentice $25.00
      Description: This unit describes the skills and knowledge required to select and use bearings, seals, gaskets, sealants and adhesives in the automotive vehicle industry. It involves preparing for the task, selecting and using sealants and adhesives, preparing and installing bearings, seals and gaskets, and completing workplace processes and documentation. The unit applies to those working in the automotive service and repair industry, It includes agricultural machinery, heavy commercial vehicles, light vehicle, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. The vehicles used will vary based upon the occupation and work context of the learner. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTB004   Inspect and service air braking systems
    • 涩里番Code: AUTM179
      Cost: Standard $44.00
      Apprentice $30.00
      Description: This unit describes the performance outcomes required to inspect and service air braking systems according to manufacturer specifications. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The air braking systems include those of agricultural machinery, heavy commercial vehicles or mobile plant machinery.
      Prerequisites: Nil
  • AURTTE104   Inspect and service engines
    • 涩里番Code: AUTM747
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to inspect and service engines. It involves preparing for the task, inspecting the engine, reporting the inspection findings, servicing and adjusting the engine, and completing workplace processes and documentation. The servicing undertaken will vary based on the work context.The unit applies to those working in the automotive service and repair industry. The engines include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant or motorcycles. The unit does not apply to outdoor power equipment engines.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTK001   Use and maintain measuring equipment in an automotive workplace
    • 涩里番Code: AUTM560
      Cost: Standard $35.00
      Apprentice $35.00
      Description: This unit describes the performance outcomes required to select, use, maintain and store automotive measuring equipment. It involves selecting and maintaining measuring equipment, and using measuring equipment to determine length, width, angles, ovality, depth, out of square, clearances, run-out, pressure and temperature of automotive components and materials. It applies to those working in all sectors of the automotive industry. This unit does not apply to electrical measuring equipment that measures voltage, resistance or current flow.
      Prerequisites: Nil
  • AURAEA002   Follow environmental and sustainability best practice in an automotive workplace
    • 涩里番Code: AUTM514
      Cost: Standard $55.00
      Apprentice $55.00
      Description: This unit describes the performance outcomes required to follow environmental and sustainability best practices, including complying with established workplace procedures and environmental regulations as well as following sustainability practices that may reduce the environmental impact of work practices and outputs. It applies to those working in the automotive industry.
      Prerequisites: Nil
  • AURVTW109   Carry out basic gas metal arc welding
    • 涩里番Code: AUTM798
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to prepare and weld components using the gas metal arc welding (GMAW) process. It involves preparing for the task, selecting and using GMAW equipment, inspecting and testing weld quality, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURVTW018   Carry out oxyacetylene welding, thermal heating and cutting
    • 涩里番Code: AUTR347
      Cost: Standard $65.00
      Apprentice $65.00
      Description: This unit describes the skills and knowledge required to carry out basic welding, thermal heating and cutting operations. It involves preparing for the task, setting up and operating an oxyacetylene plant, setting gas pressures, identifying and adjusting flame appropriate for welding, thermal heating or cutting requirements, selecting and using suitable personal protective equipment (PPE), and completing workplace processes and documentation. It applies to those working within the automotive service and repair industry.
      Prerequisites: Nil

Complete 13

  • AURTTC103   Diagnose and repair cooling systems
    • 涩里番Code: AUTM746
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the cooling systems of vehicles. The systems used vary based on the work context. It involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The cooling systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTQ001   Inspect and service final drive assemblies
    • 涩里番Code: AUTM183
      Cost: Standard $15.00
      Apprentice $15.00
      Description: This unit describes the performance outcomes required to inspect and service final drive assemblies. It involves preparing for the task, inspecting the assembly, reporting the inspection findings, servicing and adjusting the assembly, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The final drive assemblies include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery or outdoor power equipment.
      Prerequisites: Nil
  • AURTTX102   Inspect and service manual transmissions
    • 涩里番Code: AUTM755
      Cost: Standard $25.00
      Apprentice $25.00
      Description: This unit describes the skills and knowledge required to inspect and service manual transmissions. It involves preparing for the task, inspecting the transmission, reporting the inspection findings, servicing and adjusting the transmission, and completing workplace processes and documentation.This unit applies to those working in the automotive service and repair industry. The manual transmissions include those of agricultural machinery, heavy commercial vehicles, light vehicles, motorcycles, mobile plant machinery or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTX103   Inspect and service automatic transmissions
    • 涩里番Code: AUTM756
      Cost: Standard $25.00
      Apprentice $25.00
      Description: This unit describes the skills and knowledge required to inspect and service automatic transmissions. It involves preparing for the task, inspecting the transmission, reporting the inspection findings, servicing and adjusting the transmission, and completing workplace processes and documentation.The unit applies to those working in the automotive service and repair industry. The automatic transmissions include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTB101   Diagnose and repair heavy vehicle air braking systems
    • 涩里番Code: AUTM700
      Cost: Standard $105.00
      Apprentice $105.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the air braking systems of heavy vehicles. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The air braking systems include those in agricultural machinery, heavy commercial vehicles or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTD102   Diagnose and repair heavy vehicle steering systems
    • 涩里番Code: AUTM701
      Cost: Standard $85.00
      Apprentice $85.00
      Description: This unit describes the skills and knowledge required to diagnose and repair heavy vehicle steering systems. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The steering systems include those in heavy commercial vehicles. This unit does not apply to agricultural machinery or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTD103   Diagnose and repair heavy vehicle suspension systems
    • 涩里番Code: AUTM702
      Cost: Standard $85.00
      Apprentice $85.00
      Description: This unit describes the skills and knowledge required to diagnose and repair heavy vehicle suspension systems. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The suspension systems include those in heavy commercial vehicles. This unit does not apply to agricultural machinery or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTQ102   Diagnose and repair heavy commercial vehicle final drive assemblies
    • 涩里番Code: AUTM706
      Cost: Standard $65.00
      Apprentice $65.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the final drive assemblies of heavy commercial vehicles. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The final drive assemblies include those in heavy commercial vehicles. This unit does not apply to agricultural machinery or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTQ103   Diagnose and repair heavy vehicle drive shafts
    • 涩里番Code: AUTM707
      Cost: Standard $65.00
      Apprentice $65.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the drive shafts of heavy vehicles. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The drive shafts include those in heavy vehicles. This unit does not apply to agricultural machinery or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTX101   Diagnose and repair heavy vehicle manual transmissions
    • 涩里番Code: AUTM708
      Cost: Standard $105.00
      Apprentice $105.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the manual transmissions of heavy vehicles. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The manual transmissions include those in agricultural machinery, heavy commercial vehicles or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTD002   Inspect and service steering systems
    • 涩里番Code: AUTM189
      Cost: Standard $25.00
      Apprentice $25.00
      Description: This unit describes the performance outcomes required to inspect and service steering systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The steering systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment.
      Prerequisites: Nil
  • AURTTD004   Inspect and service suspension systems
    • 涩里番Code: AUTM190
      Cost: Standard $25.00
      Apprentice $25.00
      Description: This unit describes the performance outcomes required to inspect and service front and rear suspension systems. It involves preparing for the task, inspecting the front and rear suspension system for wear, oil or air leaks and physical damage, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The suspension systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery, motorcycles, outdoor power equipment or trailers.
      Prerequisites: Nil
  • AURHTX104   Diagnose and repair heavy vehicle clutch systems
    • 涩里番Code: AUTM710
      Cost: Standard $75.00
      Apprentice $75.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the clutch systems of heavy vehicles. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The clutch systems include those in agricultural machinery, heavy commercial vehicles or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURETU103   Service air conditioning and HVAC systems
    • 涩里番Code: AUTM697
      Cost: Standard $55.00
      Apprentice $55.00
      Description: This unit describes the skills and knowledge required to service air conditioning systems, including heating, ventilation and air conditioning (HVAC) systems, fitted to a range of vehicles and machinery. It involves preparing for the task, carrying out performance testing and correct servicing procedures, performing post-service testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. Automotive air conditioners, in addition to HVAC systems, include those in agricultural machinery, heavy commercial vehicles, light vehicles or mobile plant machinery. It does not involve removing, replacing or topping up of refrigerant. The systems used vary depending on the work context.Licensing requirements apply to this unit. Users are advised to check with relevant regulatory authority. An Australian Refrigeration Council accredited (ARCtick) Refrigerant Handling licence is required for those carrying out this work.
      Prerequisites: Nil
  • AURETU104   Diagnose and repair air conditioning and HVAC components
    • 涩里番Code: AUTM698
      Cost: Standard $75.00
      Apprentice $75.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the air conditioning systems, including heating, ventilation and air conditioning (HVAC) systems, fitted to a range of vehicles and machinery for passenger convenience and comfort. The systems used vary based on the work context. It involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in an automotive service and repair industry. Automotive air conditioners, in addition to HVAC systems, include those in agricultural machinery, heavy commercial vehicles, light vehicles or mobile plant machinery.Licensing requirements apply to this unit. Users are advised to check with relevant regulatory authority. An Australian Refrigeration Council accredited (ARCtick) Refrigerant Handling licence is required for those carrying out this work.
      Prerequisites: Nil

Complete all 9

  • AURETR124   Diagnose and repair compression ignition engine management systems
    • 涩里番Code: AUTM685
      Cost: Standard $105.00
      Apprentice $105.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the compression ignition engine management systems of vehicles, vessels or machinery. The unit involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in an automotive service and repair industry. The compression ignition engine management systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURETR129   Diagnose and repair charging systems
    • 涩里番Code: AUTM688
      Cost: Standard $65.00
      Apprentice $65.00
      Description: This unit describes the skills and knowledge required to diagnose and repair charging systems. The systems used vary based on the work context. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The charging systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURETR130   Diagnose and repair starting systems
    • 涩里番Code: AUTM689
      Cost: Standard $65.00
      Apprentice $65.00
      Description: This unit describes the skills and knowledge required to diagnose and repair starting systems. The systems used vary based on the work context. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The starting systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTE102   Diagnose and repair heavy vehicle compression ignition engines
    • 涩里番Code: AUTM703
      Cost: Standard $145.00
      Apprentice $145.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the compression ignition engines of heavy vehicles. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The compression ignition engines include those in agricultural machinery, heavy commercial vehicles, mobile plant machinery or marine vessels.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTA118   Develop and carry out diagnostic test strategies
    • 涩里番Code: AUTM744
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to develop and carry out a diagnostic testing strategy on vehicles, vessels or machinery. It involves confirming the existence of a fault, identifying the required diagnostic information, developing a diagnostic strategy, applying the diagnostic strategy, and reporting conclusions.The unit applies to those who work in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURTTF105   Diagnose and repair engine forced-induction systems
    • 涩里番Code: AUTM800
      Cost: Standard $35.00
      Apprentice $35.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in engine forced-induction systems. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation. The unit applies to those who work in the automotive service and repair industry. The engine forced-induction systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURETR122   Diagnose and repair vehicle dynamic control systems
    • 涩里番Code: AUTM683
      Cost: Standard $145.00
      Apprentice $145.00
      Description: This unit describes the skills and knowledge required to diagnose and repair vehicle dynamic control systems. These systems include the functions of a vehicle electronic braking control module (EBCM), such as anti-lock braking, brake assist, descent control, electronic brake force distribution, electronic park brake, hill start assist, stability control, traction control and active roll-over protection. The systems used vary based on the work context. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. Embedded networked systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTZ101   Diagnose and repair heavy vehicle emission control systems
    • 涩里番Code: AUTM711
      Cost: Standard $45.00
      Apprentice $45.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the emission control systems of heavy vehicles. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The emission control systems include those in agricultural machinery, heavy commercial vehicles, marine vessels or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • AURHTF102   Diagnose and repair heavy vehicle diesel fuel injection systems
    • 涩里番Code: AUTM704
      Cost: Standard $165.00
      Apprentice $165.00
      Description: This unit describes the skills and knowledge required to diagnose and repair faults in the diesel fuel injection systems of heavy vehicles and machinery. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.The unit applies to those who work in the automotive service and repair industry. The diesel fuel injection systems include those in agricultural machinery, heavy commercial vehicles, mobile plant machinery or marine vessels. The unit does not apply to electronic compression ignition engine management systems.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil

Related Courses

Certificate III Automotive Electrical Technology AUR30320
Certificate III Mobile Plant Technology AUR31220
Certificate III Light Vehicle Mechanical Technology AUR30620
Certificate III Automotive Electric Vehicle Technology (Light Vehicle) AUR32721
Certificate III Automotive Body Repair Technology AUR32120
Certificate III Automotive Refinishing Technology AUR32420
Statement Attainment Battery Electric Vehicle Inspection and Servicing Skill Set AURSS00064
Statement Attainment Depower and Reinitialise Battery Electric Vehicles
Statement Attainment Automotive Air Conditioning
Statement Attainment Electric Vehicle Diagnose and Repair Skill Set - Light Vehicle
Statement Attainment Electric Vehicle Diagnose and Repair Skill Set - Heavy Vehicle

More Information

For more information about this course please contact 涩里番Student Services on (02) 6207 3188 or email infoline@cit.edu.au